MultiTab Widget

Friday, June 13, 2014

Countercurrent Multiplier

Osmotic gradient in the medulla is useful in producing concentrated urine. The osmolarity gradually increases from 300 mOsm/L in the outer medulla to about 1200 mOsm/L in the inner medulla. How is this gradient established?

Steps Involved in Causing Hyperosmotic Renal Medullary Interstitium.Step-1First, assume that the loop of Henle is filled with fluid with a concentration of 300 mOsm/L, the same as that leaving the proximal tubule.

Step-2
The active pump of the thick ascending limb on the loop of Henle is turned on, reducing the concentration inside the tubule and raising the interstitial concentration; this pump establishes a 200-mOsm/L concentration gradient between the tubular fluid and the interstitial fluid.

Step-3
The tubular fluid in the descending limb of the loop of Henle and the interstitial fluid quickly reach osmotic equilibrium because of osmosis of water out of the descending limb. The interstitial osmolarity is maintained at 400 mOsm/L because of continued transport of ions out of the thick ascending loop of Henle.

Step-4
Additional flow of fluid into the loop of Henle from the proximal tubule causes the hyperosmotic fluid previously formed in the descending limb to flow into the ascending limb.

Step-5
Once this fluid is in the ascending limb, additional ions are pumped into the interstitium, with water remaining behind, until a 200-mOsm/L osmotic gradient is established, with the interstitial fluid osmolarity rising to 500 mOsm/L.


Step-6
Then, once again, the fluid in the descending limb reaches equilibrium with the hyperosmotic medullary interstitial fluid, and as the hyperosmotic tubular fluid from the descending limb of the loop of Henle flows into the ascending limb, still more solute is continuously pumped out of the tubules and deposited into the medullary interstitium.

Step-7
These steps are repeated over and over, with the net effect of adding more and more solute to the medulla in excess of water; with sufficient time, this process gradually traps solutes in the medulla and multiplies the concentration gradient established by the active pumping of ions out of the thick ascending loop of Henle, eventually raising the interstitial fluid osmolarity to 1200 to 1400 mOsm/L as shown in step 7. Thus, the repetitive reabsorption of sodium chloride by the thick ascending loop of Henle and continued inflow of new sodium chloride from the proximal tubule into the loop of Henle is called the countercurrent multiplier. The sodium chloride reabsorbed from the ascending loop of Henle keeps adding to the newly arrived sodium chloride, thus "multiplying" its concentration in the medullary interstitium.


Overview
Click on the following image to see a have a larger view of all the steps at once:

5 comments:

  1. Sir thank you so much for elaborating on the mechanism of countercurrent multiplier. It has solved all my doubts regarding this topic.

    ReplyDelete
  2. sir u r a sheer genius

    ReplyDelete
  3. JOHARA SLB.1G NARAYANGUDAJuly 26, 2009 at 12:14 PM

    THANK YOU SIR U R AN EXCELLENT LECTURER AND YOU DID UR BEST MAKING ME UNDERSTAND THIS DIFFICULT TOPIC... THANX A LOT.

    ReplyDelete
  4. u have done a world of good sir, by creating this post..........thanks a lot..........

    ReplyDelete